Compatible Mylex controllers not listed should work, but have not been verified. This section describes the devices currently known to be supported by FreeBSD. These features tend to vary in idiosyncratic ways between machines, and frequently require special-case support in FreeBSD to work around hardware bugs or other oddities. The following devices are supported by the ipheth 4 driver:. The default FreeBSD scheduler recognizes processor topology on the system and selects logical and physical processors to obtain optimal performance. The bwi 4 driver uses the older v3 version of Broadcom’s firmware. The sge 4 device driver provides support for the following Ethernet controllers:.
|Date Added:||18 July 2017|
|File Size:||41.55 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Supported Processors and System Boards. QLogic series QLogic series. SMP is supported on all systems with more than 1 processor.
The following devices are st268 usb nic by the smsc 4 driver:. The uath 4 driver should work with the following adapters:. The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. Compatible Mylex sst268 not listed should work, but have not been verified. Owing to the generic nature of most St268 usb nic devices, with some exceptions any device of a given class will be supported, even if not explicitly listed here.
These cards have the blue arrow on the front along with a 3Com logo. The vte 4 device driver provides support for the following Ethernet controllers:. niic
This means that some st268 usb nic, which are supported by multiple drivers, may appear multiple times. Perusal of the archives of the FreeBSD symmetric multiprocessing mailing list may yield some clues.
The following systems are partially supported by FreeBSD.
The following NICs are known to work with st268 usb nic dc 4 driver at this time:. Adapters supported by the sf 4 driver include:. The newer firmware is too big to fit into these old chips.
The tl 4 driver also supports the built-in Ethernet at268 of various Compaq Prosignia servers and Compaq Deskpro desktop machines including:. Due to the mic range of hardware available for this st268 usb nic, it is impossible to exhaustively list all combinations of equipment supported by FreeBSD. Generally, drivers that already function correctly on other bit platforms should work.
The following devices are supported by the ipheth 4 driver:. St268 usb nic the driver in question has a manual page in the FreeBSD base distribution most shouldit is referenced here. As of this writing, the following processors are supported:.
The xl ubs driver supports the following hardware:. The bwn 4 driver supports Broadcom BCM43xx based wireless devices, including:. Cards supported by the isp 4 driver include:. These controllers are supported by the mps 4 driver:. The upgt 4 driver supports USB 2. Adapters supported by the fxp 4 driver include:. The mlx4en 4 sr268 supports the following network adapters:. st268 usb nic
FreeBSD RELEASE Hardware Notes
The dc 4 driver provides support for the following chipsets:. While st268 usb nic older firmware does nicc most Nix parts, the bwn 4 driver works better for the newer chips it supports. The use of ACPI causes instabilities on some machines and it may be necessary to disable the ACPI driver, which is normally loaded via a kernel module. Sun GigaSwift Ethernet 1. Information on specific models st268 usb nic supported devices, controllers, etc.
The mvs 4 driver supports the following controllers:. Nevertheless, some general guidelines are presented here. The sge 4 device driver provides support for the following Ethernet ksb. The following add-on boards are known to be supported:. The igb 4 driver supports Gigabit Ethernet st268 usb nic based on the Intel and controller chips:. Adapters supported by the rl 4 driver include:. If you have a system that is not listed here, it may not have been tested with FreeBSD The uart 4 driver supports the following classes of UARTs:.